Manitowoc convotherm 4, Руководство пользователя

Страница: 86 / 140

4.3.12 Filling, inserting and removing the smoker drawer (only applies to
ConvoSmoke)
For your safety when using the appliance
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings
specified in 'Working safely with the appliance' on page 57, and follow the instructions given there.
Inflowing air
Risk of burns or fire from flying sparks
Air flowing onto the hot smoker material can result in flying sparks.
Do not remove the lid from the smoker drawer until the smoker drawer has cooled down completely
in a fireproof location sheltered from the wind. Always keep the lid on the smoker drawer during
smoking.
Always leave the smoker-material ashes to cool before disposal.
Prior knowledge required
You need to know these operations
■
Opening and closing the appliance door safely 59
Smoker material
Always use as smoker material only briquettes made of hardwood chips intended for this purpose.
The manufacturer recommends using the brand "BRADLEY FLAVOUR BISQUETTES" as smoker
pucks, which you can obtain online (http://www.bradleysmoker.co.uk) or from relevant dealers.
Smoker materials such as loose saw dust, loose wood shavings, loose wood chips or wooden slats
must NOT be used.
Requirements
■
The cooking chamber has cooled down to ambient temperature after its last use.
or:
While a cooking profile is running, the software prompts you to insert the smoker drawer. In this
case, the software automatically runs 'cool down' to cool the cooking chamber before prompting to
insert the smoker drawer.
■
The smoker heater is fitted in the cooking chamber.
■
The racks are fitted and secured.
■
The case, including smoker grille and lid to the smoker drawer, have been cleaned and dried prop‐
erly.
4 Cooking procedures
User manual 86