Manitowoc 140.5.204 Скачать руководство пользователя страница 587

Страница: 587 / 669

9.6 Loading the machine

9.6.1  Preparing the machine for loading......................... 587
9.6.2  Loading the stabilized machine............................. 587
9.6.3  Moving the machine onto the transport vehicle..... 620
9.6.4  Lifting the machine onto the transport vehicle....... 621
9.6.5  Securing the machine for transport........................ 626

9.6.1 Preparing the machine for loading

Clean the machine's track wheel chains of mud, snow, and

ice.

Fold all the attachments into the transport position and

secure them, or remove them.

Depending on the mode of transport, remove the counter-

weight.

The uppercarriage is in the 0° or 180° position.

Move the boom into the position required for the specific

mode of transport.

Fold in the railing.

Fold up or remove the walkways.

9.6.2 Loading the stabilized machine

Machine damage due to overloading of the outrigger cylin-

ders!
–

Do not move work equipment while the machine is stabi-

lized.

When work implements are moved while the machine is stabi-

lized, the outrigger cylinders can be overloaded. This may

cause damage to the ground and to the outrigger cylinders.

Danger of material damage if used on unsuitable ground.
–

Only perform the tasks on solid, level ground with suffi-

cient soil strength

–

Observe the permissible ground pressure.

–

Position the machine on level ground with sufficient load-

bearing capacity and stabilize the machine.

–

Use suitable outrigger pads.

The machine may suffer damage if positioned or used on

unsuitable ground with insufficient soil strength.

When stabilized, the fully ballasted machine exerts a maximum

pressure on the ground via the outrigger pads.

NOTICE

Pressure exerted on the ground by

the stabilized machine

Transport

27.04.2020

140.5.204 Telescopic crane

587

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды