Reference
Only
1
12000-1 / 12000E-1
[
TABLE OF CONTENTS
]
SAFETY
1. REFERENCE MATERIALS
1.1
12000-1 SPECIFICATION
....................................................................................................1-1
1.1.1
CRANE OUTSIDE DIMENSION
....................................................................................1-1
1.1.2
CRANE SPECIFICATION, PERFORMANCE
............................................................1-2
1.1.3
CRANE WORKING RANGES
........................................................................................1-4
1.2
12000-1 DIMENSION, WEIGHT OF EACH COMPONENT
.......................................1-7
1.2.1
BASE MACHINE
................................................................................................................1-7
1.2.2
COUNTERWEIGHT
..........................................................................................................1-9
1.2.3
ATTACHMENT
....................................................................................................................1-11
1.3
12000-1 CLAMSHELL RATED LOADS (OPTION)
........................................................1-14
1.4
12000-1 SWING AND TRAVEL STABILITY
....................................................................1-17
1.5
12000-1 TRAVEL ALLOWABLE SLOPE ANGLE
...........................................................1-20
1.5.1
CRANE ATTACHMENT INSTALLED : BOOM INSERT CONFIGURATION
.....1-20
1.6
12000E-1 SPECIFICATION
.................................................................................................1-27
1.6.1
CRANE OUTSIDE DIMENSION
....................................................................................1-27
1.6.2
CRANE SPECIFICATION, PERFORMANCE
............................................................1-28
1.6.3
CRANE WORKING RANGES
........................................................................................1-30
1.7
12000E-1 DIMENSION, WEIGHT OF EACH COMPONENT
....................................1-33
1.7.1
BASE MACHINE
................................................................................................................1-33
1.7.2
COUNTERWEIGHT
..........................................................................................................1-35
1.7.3
ATTACHMENT
....................................................................................................................1-37
1.8
12000E-1 CLAMSHELL RATED LOADS (OPTION)
.....................................................1-41
1.9
12000E-1 SWING AND TRAVEL STABILITY
..................................................................1-44
1.10
12000E-1 TRAVEL ALLOWABLE SLOPE ANGLE
........................................................1-47
1.10.1 CRANE ATTACHMENT INSTALLED : BOOM INSERT CONFIGURATION
.....1-47
1.11
ENGINE MAIN SPECIFICATION
........................................................................................1-55
2. MAINTENANCE STANDARDS TEST PROCEDURES
2.1
MAINTENANCE STANDARD
..............................................................................................2-1
2.1.1
PIN, BUSHING, SPRING, LINING AND SHEAVE
....................................................2-1
2.1.2
TRAVEL DEVICE
...............................................................................................................2-7
2.2
PERFORMANCE STANDARD AND TEST PROCEDURE
.........................................2-13
2.2.1
OPERATING SPEED
........................................................................................................2-15
2.2.2
HYDRAULIC PRESSURE
...............................................................................................2-16
2.2.3
SWING BEARING
..............................................................................................................2-21
3. GENERAL WORK STANDARD
3.1
STANDARD TIGHTENING TORQUE
...............................................................................3-1
3.1.1
TIGHTENING TORQUE OF CAP SCREWS AND NUTS
......................................3-1
Published 07-15-16, Control # 254-01
