Manitou MT732ST38, Руководство по эксплуатации и технике безопасности

Страница: 134 / 143

4 - 5
INTRODUCTION
- Your lift truck must be used with interchangeable equipment. These items are called: ATTACHMENTS.
- A wide range of attachments, specially designed and perfectly suitable for your lift truck is available and guaranteed by
MANITOU.
IMPORTANT
Only attachments approved by MANITOU are to be used on our lift trucks
(see: 4 - ADAPTABLE ATTACHMENTS IN OPTION ON THE RANGE: TECHNICAL SPECIFICATIONS OF ATTACHMENTS).
The manufacturer’s liability will be denied in case of modification or of attachment adaptation carried out without his knowing it.
- The attachments are delivered with a load chart concerning your lift truck. The operator’s manual and the load chart
should be kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions
contained on this notice.
IMPORTANT
Maximum loads are defined by the capacity of a lift truck taking account of the attachment’s mass and centre of gravity.
In the event of the attachment having less capacity than the lift truck, never exceed this limit.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
IMPORTANT
Depending on their size, certain attachments may, when the boom is lowered and retracted, come into contact with the front tyres and cause damage to them, if reverse
tilt is activated in the forward tilt direction.
TO REMOVE THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT EXTENT FOR THE PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE.
SUSPENDED LOAD
IMPORTANT
Suspended load MUST be handled with a lift truck designed for that purpose
(see: 1 - OPERATING AND SAFETY INSTRUCTIONS: LOAD HANDLING INSTRUCTIONS: H - TAKING-UP AND SETTING-DOWN A SUSPENDED LOAD).
USE THE BUCKETS
IMPORTANT
The MT 732 ST3B and MT 932 STB, are lift trucks essentially intended for handling. Occasional use with the buckets CBC/CBR/CB4x1 is authorised (only with the boom
completely retracted, in order to reduce stress on the boom head), but under no circumstances is intensive use for difficult applications (quarry, waste, cereals, agriculture,
etc) permissible.
647449
(30/11/2015)
MT
732/932
ST3B