Manitou MI 15 D, Руководство пользователя

Страница: 74 / 106

3-14
A4 – HYDRAULIC FLUID LEVEL
CHECK
Place the lift truck on level ground with the engine stopped, the mast tilted backward and
lowered as far as possible.
- Raise the engine cover (see: 2 - DESCRIPTION: INSTRUMENTS AND CONTROLS).
- Remove cap 1 (fig. A4/1).
- Refer to the dipstick 2 (fig. A4/1 and A4/2): A MI 15 D / MI 15 G / MI 18 D / MI 18 G
B MI 20 D / MI 20 G / MI 25 D / MI 25 G
C MI 30 D / MI 30 G / MI 35 D / MI 35 G
- The level is correct when it is between the MIN and MAX markings on the dipstick.
- Top up if necessary (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL).
- Add fluid through filler port 3 (fig. A4/1).
Use a clean funnel and clean the underside of the oil drum before filling.
- Put back the cap 1 (fig. A4/1).
- Visually check that there is no leakage in the tank and pipes.
NOTE: Always maintain the fluid level at maximum as cooling depends on the fluid flowing
through the reservoir.
- Check the operation of the hydraulic controls (see: 2 - DESCRIPTION: 15 – PARKING BRAKE
LEVER).
Consult your dealer in case of abnormal operation of the hydraulic controls.
A5 – BRAKE FLUID LEVEL
CHECK
Place the lift truck on level ground.
- Lift up the braking fluid reservoir access panel 1 (fig. A5/1).
- Visually check the level.
- The level is correct when it is at the MAX level on the tank.
- If necessary, add fluid through filler port 2 (fig. A5/2) (see: 3 - MAINTENANCE: LUBRICANTS
AND FUEL).
- Visually check that there is no leakage in the tank and pipes.
If the brake fluid level is abnormally low, consult your dealer.
- Check the operation of the service brakes (see: 2 - DESCRIPTION: 14 – SERVICE BRAKE AND
TRANSMISSION CUT OFF PEDALS).
- Check the proper operation of the parking brake (see: 2 - DESCRIPTION: 15 – PARKING BRAKE
LEVER).
Consult your dealer in case of abnormal operation of the brakes.
A4/1
2
3
1
A5/1
1
A5/2
2
A B C
A4/2
647377
(31/03/2014)