Manitou MC 18-2 D K ST5 S1, Руководство оператора

Страница: 87 / 120

CHECK Tension and alignment of mast lifting chains
Place the lift truck on level ground with the mast in a vertical position and the forks
raised approximately 200 mm.
IMPORTANT
These checks are important to ensure correct mast operation.
In case of technical faults, consult your dealer.
- Check the alignment of the mast lifting chains between the carriage chain fasteners
and the chain rollers.
- Manually inspect the chain tension and, if necessary, adjust as indicated below
while ensuring that the carriage is perpendicular to the mast.
- Loosen nut 1.
- Loosen the chain tensioner locknut 2.
- Adjust the tension by tightening or loosening the nut 3 while checking the alignment
of the lifting chains.
- Then tighten locknut 2 and nut 3.
- Retighten the nut 1.
CHECK Hydraulic oil level
Place the lift truck on level ground with the engine stopped, the mast tilted backwards
and lowered as far as possible.
IMPORTANT
Use a clean funnel and clean the underside of the oil drum before filling.
- Check dipstick 1, the correct level must be at the level of the red dot.
- If necessary, add oil ( LUBRICANTS AND FUEL).
- Open the engine cover ( 2 - DESCRIPTION - INSTRUMENTS AND CONTROLS).
- Remove the cap 2.
- Add oil through the filler port (2).
- Refit the cap.
- Check for leaks.
1
2
CHECK Windscreen washer liquid level (OPTION)
- Open the engine cover ( 2 - DESCRIPTION - INSTRUMENTS AND CONTROLS).
- Visually check the level in the tank.
- If necessary, add windscreen washer liquid ( LUBRICANTS AND FUEL) through
the filling hole 1.
3 - 15
1
2
3
1
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1