Manitou 160 ATJ E3, Инструкция по эксплуатации

Страница: 124 / 160

3-12
A - DAILY OR EVERY 10 HOURS OF OPERATION
A1 - GENERAL INSPECTION
CHECK
- Scrupulously inspect the machine and check that there are no cracked welds, corrosion or structural damage, loose or missing nuts and
bolts, hydraulic leaks, damaged control cables or loose electrical connections.”
A2 - FUNCTIONAL CHECKS
CHECK
Any malfunction of the platform must be detected every day before putting it into service. Identify any malfunction and take the platform out of
service if any malfunction is detected.
Choose a testing area on a sturdy level unencumbered surface.
When manoeuvring the platform (raising, rotation...), look all around and above you. Pay particular attention to any electrical cables or other
objects that may be in the platform’s operating area.
EMERGENCY STOP
- Press the emergency stop buttons on the controls on the ground.
> Result: the engine must stop and no functions must be active.
- Pull the red emergency stop button into the operating position and re-start the engine.
- Perform the test with the basket emergency stop button to obtain the same result.
DEAD MAN DEVICE FUNCTIONS
- Without pressing the elevation-validation button known as the “dead man device”, select an access-platform function.
> Result: the access platform should not elevate.
- Press the elevation-validation button known as the “dead man device” and select an access-platform function.
> Result: the access platform should elevate.
Carry out of this test on the functions of elevation, lowering, turret rotation and translation from the base and basket control panels to
obtain the same results.
BUZZER
- Press the basket’s warning button
> Result: the buzzer should sound.
ELEVATION/LOWERING FUNCTIONS
- From the base control panel, select all of the elevation then lowering functions (arms 1/2/3 and jib).
> Result: the access platform should raise then lower.
- From the basket control panel, select all of the elevation functions (arms 1/2/3 and jib).
> Result: the access platform should raise then lower.
STEERING
Note: when testing the functions of steering and translation, stay in the access platform, turning yourself in the direction in which the
machine is moving.
- From the basket control panel, select the steering control.
> Result: the steering wheels should turn in the controlled direction.
TRANSLATION AND BRAKING
- Select a translation control
> Result: the machine should move in the direction indicated by the white arrow for forward movement and the black arrow for backward
movement, then stop when the control is released.
TRANSLATION SPEEDS IN WORKING MODE
- Carry out lifting with one or more access-platform arms and/or extend the telescope.
- Perform a translation movement.
> Result to be obtained: the translation must be carried out at working speed.
647414 EN (27/05/2015)