the horn and the compressor (no. 3 and 7)
won
’
t have restricted airflow.
•
Install the compressor vertically and try to
angle the horn downwards, to prevent
water getting inside.
•
After you have screwed the main
components in place using the included
screws and pads, it’s tim
e to do the wiring.
Make sure you have all the components
needed to complete the circuit, which were
listed in the previous chapter.
•
If you are not experienced with electrical
wiring and circuits, take your vehicle to an
auto electrician to complete the
installation.
•
If you are confident in your electrical skills,
use the diagram below to complete the
wiring of the horn and compressor.
•
Make sure you correctly connect the
positive and negative sides of the battery
and the compressor.
•
Wire power from the battery “+” to your
switch/button in the car. Also install a 20
–
40
A fuse closer to the battery on this wire for
safety reasons.
WARNINGS
•
We highly recommend you to install the
horn with the help of a certified auto
electrician.
•
Make sure your car is powered off when
installing the horn.
•
Do not blow the horn close to humans or
animals, it can cause permanent damage to
hearing due to the high sound volume.
•
Check your local automotive rules and
regulations before installation to make sure
that the horn complies with the laws on
vehicle modifications.
•
Use this product only for its intended
purpose. Do not use attachments of any
kind.
•
Do not honk for extended periods of time.
•
Make sure you use the correct wires for the
wiring of the horn. Using the wrong wires
may present a fire hazard.
WARRANTY
The warranty is valid for 24 months. You can claim it
from DFVU d.o.o., Liparjeva 6a,
1234 Mengeš,
Slovenia, for a replacement product or a refund.
Send us your order number and purchase date in the
email, which is available by clicking on our logo in the
bottom right corner. The product has a lifetime of 24
months from the date of collection.
WEEE disposal and recycling symbol.
The WEEE symbol is attached to the
product in compliance with the EU
directive
2012/19/EU
on Waste
Electrical and Electronic Equipment
(WEEE). It is intended to deter the
improper disposal of this product and
to promote reuse and recycling.
