background image

16

POWER SUPPLY 

Type

AP-129B SMPS

Input Voltage

100 -- 240 Volts AC, 50/60Hz, 0.2Amps / 0.15Amps

Power Consumption

Maximum 30W

Protection

Separate Internal Fuse

Ambient Temperature Range                       0 – 45 Degrees C 
Usage                                                       This power supply is not for external use.

This power supply must be installed in a suitable electrical, fire 
and mechanical enclosure.
All secondary output circuits are SELV, and are not at hazardous
energy levels under normal and single fault conditions.
This power supply is for use in pollution degree 2 environments.
This power supply is defined as a Class II power supply.

PHYSICAL DIMENSIONS

Size (W X H X D)

380 X 68 X 296 mm

Eurosat

®

and Manhattan

®

are registered trademarks of Eurosat Distribution Ltd.

Eurosat reserves the right to alter product specifications without prior notice. E&OE

----------------------------------------------------------------------------------------------------------------

MASTER PASSWORD

This is the master password for your receiver. Cut this section out and keep it in a safe place. It will be useful 
later if you forget or lose your password: 

6699

Содержание Plaza ST 250

















Отзывы: