Thank you for purchasing the MANHATTAN
®
SATA 300 ExpressCard/34, Model 515245.
Compliant with PCI Express 1.0a and SATA 1.0 specifications, this card adds dual external
SATA ports to connect data storage and other SATA peripheral devices. It supports data
transfer speeds of up to 3.0 Gbps and, using 48-bit LBA, it breaks the size limit of 137 GB
hard drives to support larger storage devices.
SofTwArE iNSTALLATioN
For Windows NT
1. Insert the SATA 300 ExpressCard/34 into an available slot. Connect SATA cable(s)
between the SATA port and SATA device(s).
2. Windows will display "Found New Hardware Wizard." Click "Next."
3. Select "Search for a suitable driver for my device (recommended)" and click "Next."
4. Insert the driver CD in the CD-ROM/DVD drive and check "Specify a location" (uncheck the
other boxes). Click "Next," then enter "E:\" (if your CDROM/DVD is E:\). Click "Browse."
5. Check a location; e.g., "E:\SATA Express_2Port\Sil3132\WinXP_2000_2003_NT," and
click “Open,” then “OK.”
6. Choose "Silicon Image SiI 3132 SATALink Controller," then click "OK."
7. After the driver installation is complete, you can follow the instructions below to verify that
the controller was installed correctly.
