Hot-Swapping
Power to the computer can be on both when the drive is inserted or removed.
Use the key to turn the drive on after inserting it and off before removing it.
To insert the drive case:
1. Insert the drive case (with drive installed) into the installed docking case,
pushing firmly until the drive is seated.
2. Insert the provided key and lock the case in place by pushing the key
in and turning it clockwise. The LED beneath the switch lights after a
slight delay, indicating the device is ready to use.
To remove the drive case:
1. Unlock the drive case (if locked) by turning the key counterclockwise.
CAUTION:
Do not turn the key to unlock the drive case while the drive
is in use, as loss of data may occur.
2. Gently pull on the handle to slide the drive case out.
specifications
Standard and Certifications
• ATA 133/100/66/33, CE, TUV, RU
General
• ATA-to-ATA interface; hot-swappable
• Supports data transfer rates of
up to 133 MBps
• Electronic locking mechanism &
integrated power switch with LEDs,
2 keys
• Single rear-mount cooling fan,
4 cm (1.5 in.)
• LED indicators: Power & Activity
Connections
• Drive-to-tray: 4-pin Molex power
& 40-pin IDE data connections
• Tray-to-chassis: Centronic-type
connector (gold-plated)
• Chassis: 4-pin Molex power &
40-pin IDE data connections
Physical
• Material: aluminum
• Chassis: 219 x 146 x 41 mm
(8.625 x 5.75 x 1.625 in.)
• Tray: 203 x 114 x 41.3 mm
(8 x 4.5 x 1.625 in.)
• Weight: 723 g (25.5 oz.)
Environmental
• Operating temp.: 23 – 122˚F
(-5 – 50˚C)
• Storage temperature: -4 – 149˚F
(-20 – 65˚C)
• Operational humidity: 10 – 80%
• Storage humidity: 10 – 90%
