9. Replace the computer’s cover; reconnect the power and other external
cabling.
Mounting a Drive in the Drive Case
These steps are for installing a 3.5-inch
drive device in the drive case.
NOTE:
A special adapter kit is required in
order to install a 2.5-inch drive.
1. Remove the drive case
cover by sliding it
toward the back of
the unit.
2. If you plan to install a drive that features removable media — such as
a Zip, TR-4 tape, MO, LS-120 drive or
ATA Flash memory reader — carefully
punch out the center part of the
front panel.
IMPORTANT:
If
you are installing a new
hard drive in the case,
you may need to
configure the drive
before you install it.
Refer to the drive
manufacturer’s
documentation
and configure
