4
ENGLISH
Initial Setup / Built-in Battery Charging
Prior to initial use as a wireless headset, the built-in battery needs to be charged. A full
charge can take up to 12 hours, but you can listen to music or make phone calls while
charging.
1
Use the included USB-to-micro USB cable to connect the headset (
A
) to a powered
computer or other charging device.
2
The LED (
G
) lights red while charging and turns off when the charge is complete. Note:
The LED flashes red to indicate low voltage. Recharge the battery as soon as you can.
Bluetooth Pairing & Operation
This product utilizes the latest in Bluetooth wireless technology; wireless performance
may vary from device to device. If using this product with a Mac or PC, ensure that your
Bluetooth driver is up to date. If it isn’t, visit your computer manufacturer’s website for
details and updates.
1
Press the Multifunction button (
F
) for about 8 seconds, until the LED (
G
) alternately
flashes red and blue.
2
With the headset LED (
G
) alternately flashing red and blue, activate your device’s
Bluetooth function and search for Bluetooth devices. Refer as needed to the manual of
your phone, tablet, computer, etc. regarding the Bluetooth operation of your source
device.
3
Once the device finds “MH Freestyle,” an on-screen prompt will ask if you’re ready for
pairing. Click or press OK or Confirm to continue. Note: If the device prompts you to
enter a PIN, enter 0000 and click or press Yes or Confirm to continue.
•
After a successful connection is made, the LED (
G
) will flash blue and the headset will
beep. If the pairing has failed and the LED is still alternately flashing red and blue, the
pairing procedure needs to be re-initiated on your source device.
•
This headset can connect with two types of devices: those using a Hands-Free or Headset
Profile (HFP or HSP), such as smartphones; and those using an Advanced Audio
Distribution or Audio/Video Remote Control Profile (A2DP or AVRCP), such as laptops.
•
Every time the headset is turned on, it will automatically connect to the last connected
device.
Power on
Press the Multifunction button (F) about 3 seconds. The LED (G)
lights red, then flashes blue with an audio confirmation.
Power off
Press the Multifunction button (F) about 3 seconds. The LED (G)
lights red, then turns off with an audio confirmation.
Pairing
Press the Multifunction button (F) about 8 seconds (until the LED
alternately flashes red and blue).
Answer /
Briefly press the Multifunction button (F). Note: Press for about 2
End a call
seconds to block incoming calls when playing music.
Play/Pause
Press the Multifunction button (F) to play or pause music.
Volume up/
Press
+
(D) or
–
(E) to increase or decrease the volume.
down
Previous
Briefly press
<
(B) to play the previous song in a playlist.
Next
Briefly press
>
(C) to play the next song in a playlist.
Quick Reference Guide
