3
safety instructions
Upon receipt of your MANHATTAN Line Interactive Rackmount UPS, first remove and inspect the product
for damage. If any damage is found, notify your dealer. Keep the carton and the packing foam in the
event the product must be returned to the factory for service (damage sustained in transit when shipped
from the user are not covered under warranty).
• Place the device indoors in an area that has adequate airflow and is free from excessive dust. Do
not
allow the UPS to be exposed to moisture, rain, excessive heat or direct sunlight.
• Use of this product in life-support applications — where failure of this device can reasonably be
expected to cause failure of life-support equipment or to significantly affect its safety or effectiveness —
is
not
recommended.
• Always disconnect the input power cord from the wall outlet before replacing the battery.
• Do
not
dispose of the battery in a fire, as the battery may explode.
• Do
not
open or mutilate the battery, as it contains a toxic electrolyte harmful to both the skin and eyes.
• Proper disposal of the battery is required. Refer to your local laws/regulations regarding battery disposal.
• To avoid personal injury, use tools with insulated handles to replace the battery. Due to energy hazards,
remove wrist watches and jewelry such as rings when replacing battery.
operation & installation
This Rackmount UPS can protect your equipment from surges, spikes, blackouts, brownouts and line noise.
When AC power is present and the UPS is on, it continues to charge the battery and provide the power to
the equipment directly from the AC line. The battery can provide stable power to complete your work, save
your data and safely shut down your system when the utility power has failed.
