2
English
Drive Enclosure • Quick Install Guide
English
Hole for
screw on
each side
of base
Thank you for purchasing the MANHATTAN
®
Drive Enclosure, Model 130172.
This guide presents the basic steps to install this device. For detailed operating
instructions and specifications, refer to the user manual available at
www.manhattan-products.com
.
1. Set the Lock/Unlock switch
on the end panel to the
Unlock position.
2. Slide the cover of the Drive Enclosure off
the base.
3. Carefully place your hard drive in the
base of the enclosure so a solid
connection is made.
4. Use the included screws
and screwdriver to secure
the hard drive in place (see
the image at right), then slide the
cover of the enclosure back in place.
Place the device in the stand, if desired.
5. Use the included USB cable to connect the
enclosure to your computer.
6. Use the included power
adapter to connect the
enclosure’s +12V jack to
a power source.
7. Set the On/Off switch to On when
you’re ready to use the device. The
LEDs on either corner of the end panel
will light to indicate
either Power (top,
as shown at right) or
Activity.
NOTE:
Also shown is the One-Touch Backup button (to the left of
the On/Off switch), which is explained in the Software Installation section
of the user manual available at
www.manhattan-products.com
.
One-touch Backup button
130172_03_QIG_ML.indd 2
6/9/10 1:10:07 PM
Содержание 130172
Страница 11: ...130172_03_QIG_ML indd 11 6 9 10 1 10 26 PM...