Mangla KM 600, Инструкция по эксплуатации

Страница: 7 / 24

Avoid electrocution
• Check that the mains voltage corresponds to 230 V 50 Hz and that the circuit is
correct fused and grounded.
• Mangle may only be connected to the earth circuit.
• Keep bystanders at a safe distance.
• Mangle may only be used by one person at a time. Everyone except the person
using mangle’ll be staying at a safe distance from the work area when the unit is
running.
Do not force mangle
• Mangle works better and safer with the load it is intended for.
• Do not use mangle for purposes other than its intended purpose.
• Observe the label for maximum load.
• At the mangling of thick material consideration rolling to avoid the risk of over-
loading the machine, the warranty does not apply when mangle used incorrectly.
Unplug
• Always mangle without power by unplugging the power cord before adjustment,
replacement of parts, cleaning or maintenance work on the mangle.
General risks
Use of mangle can cause the following hazards:
• Risks due to contact with moving parts.
These risks are greatest in the following cases:
• When working near the rollers.
• In the vicinity of moving parts.
Even if the device is used as directed, it is impossible to rule out all risk factors.
The following risks remain:
- Risk of injury when changing parts.
Safety instructions
7