Mangla KM 600, Инструкция по эксплуатации

Страница: 16 / 24

Replacing mangle cloth
1. Make sure to mangle is disconnected from the mains.
2. Exposing the rollers by lifting the operating rod upward.
3. Unroll mangle the screen so that the groove becomes accessible.
4. Remove the rubber top of the groove in the roller.
5. Pull mangle cloth out of the groove.
6. Move over plastic thread from the old mangle cloth to the new.
7. Thread mangle cloth in the slot and refit the rubber top.
8. Test run the mangle to check that the cloth is mounted properly.
16