Mangescale Mg41-NE, Инструкция по эксплуатации

Страница: 66 / 184

6-4
(E)
MG41-NE / MG42
6-2-7. Start
Th is function starts updating of the peak value when an input is supplied.
Changes in measurement values in each mode when an input is supplied
Current value Unchanged
Maximum value Current value when the input was supplied is set.
Minimum value Current value when the input was supplied is set.
Peak-to-peak value Value obtained by subtracting the minimum value from the maximum value when the
input was supplied is set.
Start command
6-2-8. Comparator
Th e 32 comparator setting values for each axis can be used in combinations.
Th e combinations are determined by the comparator mode setting command.
0 : Not used (factory setting)
1 : Maximum of 16 groups of 2 settings
2 : Maximum of 8 groups of 4 settings
3 : Maximum of 4 groups of 8 settings
4 : Maximum of 2 groups of 16 settings
Th e comparator group number setting command is used to select which group value among the
combinations is used to execute the comparator. (Factory setting: 01)
Th
e target value used by the comparator can be selected from the current value, maximum value, minimum
value, and peak-to-peak value.
6. Functions and Operating Procedures