MI0131 issue 3
1
Oct 02
The Mangar Sit-u-Up has been designed to be placed on a bed without the use of securing straps.
Power is provided by the Mangar Airflo compressor.
PLEASE READ
the separate Airflo compressor
instructions that are supplied separately, before fitting and using your Sit-u-Up.
STANDARD CONTENTS LIST
1 x Sit-u-Up; 1 x Spreader Bar; 1 x Headrest; 1 x Overlay (with cover); 1 x User Instructions.
T
T
h
h
e
e
M
M
a
a
n
n
g
g
a
a
r
r
FITTING INSTRUCTIONS
•
Insert the spreader bar (A fig.1).
•
Slide the headrest (B fig.1) fully down to the tabs on
each side of the backrest.
•
Remove the pillows from the bed and place the Sit-u-Up
on the bed with the spreader bar positioned up against
the headboard. Fold the strut (C fig.2) towards the
headboard.
•
Lead the air hose (D fig.1), to the side of the bed where
the Airflo compressor is to be placed.
•
Connect the Sit-u-Up air hose and the hand control as
indicated in the separate Airflo compressor user
instructions. A standard push button hand control
(E fig. 3) is supplied with the Airflo compressor, however,
an optional lever hand control (F fig. 3) is also available.
Place the compressor by the side or under the bed, in an
out of the way position.
•
Inflate the Sit-u-Up by pressing ‘up’
on the hand
control (see separate Airflo compressor instructions).
•
Fit the overlay (G fig.4) to the Sit-u-Up by sliding it over
the top of the headrest.
Fig. 2
Headrest removed for clarity
C
B
Fig. 1
D
A
Fig. 4
G
Instructions for use
Fig. 3
E
F
Patents Pending
