Simple solutions for everyday independence
Airflo
12
7
Trouble shooting guide
Compressor does not run when ‘up’ is
selected on the 2-way hand control.
Ensure that the air hose from the product
being inflated is connected to the Airflo.
Compressor keeps stopping when trying
to inflate the lifting aid.
Check that there are no kinks in the air
hose.
Airflo 12
Weight:
3.7Kg (8 lbs)
Output pressure:
0.25 bar (3.75 psi)
Batteries:
1 x 12v - 2200mAh Ni-MH battery pack
Battery Life:
Greater than 500 charging cycles (2 - 5 years depending on usage)
Environmental protection:
(Airflo 12 housing)
IP51 (Protection against large dust deposits & vertical falling drops
of water)
(Push-button hand control)
IP67 (Totally protected against dust & immersion in water)
T
ype BF equipment
This equipment has been tested and meets the requirements of current EMC legislation
Charger:
Model number
- HX1506SR
Input:
AC 100v - 240v, 50-60Hz, 0.5A Max
Output:
DC 15v, 0.35A
Class II Double insulated equipment
Check that there are no kinks in the air
hose.
This happens when the compressor’s
internal temperature cut-out has tripped.
Leave the Airflo
12 for 60-90 minutes to
cool.
Bottom Battery Status Indicator light
flashing ‘Red’.
Compressor causes electrical
interference with another piece of
electrical equipment.
Move either the compressor or other
item further away from each other until
the interference stops.
Specifications
