Manfrotto 523 PRO, Инструкция по эксплуатации

Страница: 4 / 32

4
1. Switch the camera off
2.Connect the other end of the cable to the camera LANC plug
3. Switch the camera – now you may start using the controller
After switching the camera on, the controller LED indicator should light
continuously. The last used zoom speed mode will be set – the current
setup will be indicated by one of zoom speed LEDs.
LED indicator not lighting at all means problem with power supply of
the controller.
LED indicator blinking slowly means problem with LANC
communication.
In either case check the cable connections to camera and controller.
Controller is designed to work only with video cameras having the 2.5
mm stereo LANC jack.
Never connect controller to any other jack, which does not have the
LANC logo. It may even result in permanent controller and/or camera
damage!
Controller is designed as a standalone control system for video
cameras - it is not designed to work simultaneously with other LANC
control systems
Controller is designed to work only with video cameras having the
2.5 mm stereo LANC jack.
Never connect controller to any other jack, which does not have the
LANC logo. It may even result in permanent controller and/or
camera damage!
Controller is designed as a standalone control system for video
cameras - it is not designed to work simultaneously with LANC
control systems