2
Intercom Functions
The VMC1 Video Security Intercom System can initiate “private” room
to room conversations and whole house conversations or pages. To
respond to a call or page, there are no buttons to press. The response
at all stations are “hands free” and there is no need to stop what you
are doing.
NOTE: Door Stations calls are only initiated from the Door Station.
Room to Room Calling
All Stations in the VMC1 system have an ID number. Press
this number to talk or page another station and have a “private”
conversation.
Create Groups
Multiple Room Stations can be programmed with the same ID to
create a “Group”. Groups are treated like a single Room Station.
Depending on your specifi c installation and requirements, your Stations
may he programmed for a single digit or double digit ID. If you have
more than seven (7) interior Stations, including the Master, or use
AUX OUTPUTS from a Nightstand Station, your system should be
programmed for Double Digit Operation.
Single Digit Operation:
In Single Digit Operation, all Stations have an ID from
1 to 7
corresponding to the numbered buttons at all Stations.
1. Press Station call number to talk to that station. Green Status
LED lights up at that station and the RED Status LED blinks at all
Stations indicating that the system is active.
Note that only one conversation can be active at a time.
2. Release the button and wait for a response.
3. The response from the Paged Station is hands free.
4. To initiate a response from the Paging Station,
press the digit again.
5. To end the conversation, press CLEAR.
6. Twenty seconds after last button press, system
times out and RED Status LED light turns OFF.
Quick Start Guide: Intercom
