13
O
PERATING THE TUNER
To listen to broadcast stations, press the POWER button. Notice the display will
change from the time to station frequency. Pressing the SOURCE select button will
allow you to change from FM, AM, TAPE and AUX respectively. The SOURCE
button is available on the MCTX wireless remote control transmitter.
AUTO SCAN
When any AM or
FM band is chosen, momentarily
pressing the TUNING UP and
TUNING DOWN buttons will
change the tuned station frequency
to the next local station. The audio
will be muted and the display will
show radio station frequencies
increasing or decreasing as it
scans. When the next local radio
station is detected, audio will again
be heard.
MANUAL SCAN
Pressing and holding either the TUNING UP or TUNING
DOWN button will cause the tuner to scan each successive frequencies one at a
time whether a radio station is broadcasting on that frequency or not. You will also
be able to hear the reception at these frequencies as they are scanned. When the
desired radio station is tuned, release the TUNING UP or TUNING DOWN button
to stop the manual scan function. Manual scanning is useful for reception of distant
stations that would not otherwise be tuned with the auto scan feature. The MC702
automatically switches from stereo to mono to allow greater sensitivity for a distant
radio station.
NOTE: To scan upward or downward by just one frequency, the
TUNING UP/DOWN button should be depressed until the frequency changes--then
immediately released.
U
SING
M
EMORY
P
RESETS
Storing radio station frequencies
Change to the desired radio band
1
(FM1, FM2, AM1 or AM2), using
the source button.
Tune to the desired radio station.
2
Press and hold a numbered button
3
until the preset number is
displayed.
Example: Save a radio station in band
FM2, preset 3.
Press the SOURCE button to
1
change to FM2.
14
Tune to the desired radio station.
2
Hold the 3 button until a 3 appears
3
as the preset number.
Recalling radio station frequencies
Change to the desired radio band,
1
using the SOURCE button.
Momentarily press the desired
2
numbered preset button.
Example: Recall the radio station saved
in band AM1, preset 2.
Press the SOURCE button to
1
change to AM1.
Momentarily press the 2 button.
2
O
PERATING A TAPE OR
CD
PLAYER
The MC702 features two
source inputs to connect a
variety of built-in and
external music sources such
as Laser disc players, CD
players and tape players. The
different sources connected
to the TAPE and AUXILIARY
inputs are selectable by
pressing the SOURCE select
button once the POWER is
turned on. Momentarily
depressing the SOURCE
button changes the music
source from FM, AM, AUX and TAPE inputs, respectively. The SOURCE button
on the MCTX wireless remote control performs the same function as the SOURCE
select button on the MC702. NOTE: The SOURCE button is only active when the
power is on. NOTE: IF the MC702 is installed with the MCD6 multidisc CD
changer, the TUNING UP/DOWN buttons on the MCTX wireless remote control
transmitter will operate the track selection when AUX mode is selected on the
MC702.
A
DJUSTING MUSIC VOLUME