5
SETUP
Note:
The MC702 remains in the set mode for 25 seconds with no activity
(no buttons being pressed) after which the unit automatically returns
to the normal mode of operation. The TIME SET button must be
pressed again to return to the set mode.
S
ETTING THE TIME
When the Time/Auto Set button is
pressed momentarily, the display
will show SET TIME and the current
time will be displayed with the hours
flashing. The UP and DOWN
buttons (either TUNING UP and
DOWN or VOLUME UP and
DOWN) can then be used to
increment or decrement the current
time hours. Pressing the UP button
(or DOWN button) momentarily will
increment (or decrement) the hours
by one each time the key is pressed. Holding the UP button (or DOWN button)
depressed will rapidly increment (or decrement) the hours until the button is
released. The time display also includes the AM or PM indicator that is changed
by scrolling the hours past 12:00.
Once the current hours have been set correctly, momentarily press the
TIME/AUTO SET button again. The display will show SET TIME and the current
time will be shown with the minutes flashing. The UP and DOWN buttons can be
used as described previously to increment or decrement the current time minutes.
Once the current minutes have been set correctly, momentarily press the
TIME/AUTO SET button again to
return to the normal mode or let the
MC702 automatically return to the
normal mode if no buttons are
pressed for 25 seconds.
S
ETTING
A
UTOMATIC ON
/
OFF TIME
To set the AUTO on and off times,
the TIME/AUTO SET button must
be momentarily pressed three times
6
without changing the current time. After pressing the TIME/AUTO SET button for
the third time, the display will show
SET AUTO ON TIME
and the auto on time will
be displayed with the hours flashing. The UP and DOWN buttons can be used as
previously described to increment or decrement the auto on time hours.