dmc3-4
M&S Systems | 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com
9
Figure 7—Tone Settings: Loudness
Display Brightness
1.
Simultaneously press TUNE UP and POWER. The display cycles through brightness
levels: low, medium, and high, then repeats the cycle.
2.
Press the buttons repeatedly until you reach the brightness you prefer.
Intercom Selector Switch Settings
You can set all major Intercom functions using the Intercom selector switches on the
Master Station.
You can set each station to one of four configurations:
•
Intercom Only
•
Radio/INT (Music source and Intercom)
•
Off
•
Monitor
Note: When the system has more than 9 Room Stations some intercom selector
switches will control two room stations.
¿
TUNE
12:20
P
AUTO
TIME
PRESET
POWER
TONE
SOURCE
¿
VOLUME
À
LISTEN TALK
DOOR TALK
¿
TUNE
À
LOUDNESS
Turn music on
Change setting
Select setting to
change
ON
DOOR TALK
DOOR TALK
