dmc3-4
M&S Systems | 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com
6
5.
If you don’t want to assign a preset number, wait 5 seconds and your selected radio
station will automatically be assigned to the preset number that is displayed. If you
want to select the preset number, press the PRESET button repeatedly to cycle
through numbers
1
-8 until you reach the preset number you want.
6.
Wait 5 seconds. The display updates to show the new station for the selected preset
number.
Note: This activity can be cancelled at any time during the process by pressing TUNE
UP and TUNE DOWN simultaneously again, and no new preset is stored.
Scan Mode
Two scan modes are available. The scan mode for the room stations is set at the
master. The two scan modes are identified below. To set your scan mode:
•
Scan
1
—Allows the Room/Patio stations to scan through the four music sources
(AUX, AM, FM, CD). On radio bands AM and FM, Scan
1
scans through the preset
radio stations: AM
1
-8 and FM
1
-8. See
Music Settings/Radio Settings
for information
on how to preset radio stations.
•
Scan 2—Allows Room/Patio stations to scan through the four music sources (AUX,
AM, FM, CD.) On radio bands AM and FM, Scan 2 scans all strong stations before
moving on to the next source.
Figure 4—Scan Progressions
Scan 1
AUX
AM 1-8
FM 1-8
CD
Scan 2
AUX
AM Strong Stations
FM Strong Stations
CD
