9
3.3 REPAIR
Should the machine fail despite careful manufacturing and testing procedures, the
repair must only be carried out by an authorised BEHA customer service centre.
If it is necessary to replace the connecting cable, this must be done by the
manufacturer or his representative in order to avoid safety hazards.
3.4 WARRANTY
In the event of the tool being improperly handled, used for purposes for which it is
not intended and/or of the service and maintenance instructions not being observed
by non-authorized persons, no warranty shall be in effect for damages/consequen-
tial damages.
Complaints can only be honored if the machine is returned in the undisassembled
condition. Customer-specific modifications result in loss of warranty.
3.5 STORAGE
The device must be stored in a dry and closed room. If the unit has been transported at
extremely high temperatures, it must be acclimatised before being switched on until it is
completely dry.
Temperature range
-15°...+50°C
Max. relative air humidity
90 % at 30°C
65 % at 50°C
3.6 DISPOSAL / ENVIRONMENTAL COMPATIBILITY
This machine consists of materials which can be disposed of in a recycling process.
Before disposal, render the machine unusable.
Do not throw the machine into the garbage collection.
According to national regulations this machine must be disposed of in an environ-
mentally-compatible recycling process.