Features
Installation and maintenance
Technical specification
Caution:
Blades are sharp. Handle carefully.
• Remove all packaging and take away the blade covers.
• Rated voltage:
220-240V~ 50/60Hz
• Rated power:
600W
• Insulation class:
II
• High speed, low noise, small vibration, inner PCB control.
• Speed adjusting settings.
•
The symbol indicates the low speed.
•
The symbol indicates the high speed.
Operation guidelines
Before using for the first time
To use the hand blender
• Remove the protective cover from the blade of the blender shaft.
• Clean the blender shaft and beaker.
• Fit the power handle inside the blender shaft, turn clockwise
and lock until you hear a slight click. If this is the case, the blender
shaft is locked correctly.
• Check if the power cord is not damaged.
• Make sure your electricity supply is the same as the one shown on
the power handle.
• Fill the food to the beaker (not more than the maximum indicated
level).
• Plug in, adjust the desired setting, hold the power handle with
steady. Switch the appliance on by pressing the switch button.
• Immerse the blade guard completely in the ingredients.
• Blend the ingredients by moving the appliance slowly up and
down and in circles.
• After you have completed blending, Release the switch button,
then unplug from outlet.
•
Warning:
The continuous operating time must be less than
20 seconds. Never blend hot oil, fat or meat.
• If your blender gets blocked, first stop and unplug before clearing.
• After use, unplug and dismantle.
• Always switch off and unplug before cleaning. Please refer to the
instruction in the “care and cleaning”.
GB-8
GB-9