MANDÍK, a. s., Dobříšská 550, 267 24 Hostomice | www.mandik.cz
|
23
®
EN
Swivel console
Swivel console for installation of MONZUN heaters on a supporting
vertical structure allowing the device to rotate on both sides. After in-
stallation, the swivel console must be firmly fixed. In this way, the heat-
er is attached only to the hinge points located on the bottom panel.
Note: The heater must not be in collision with the flue gas outlet and
the gas supply.
Pic 23:
Swivel console
Roof section
The roof section is designed to be installed in the roof opening,
serves to fasten the roof head. It consists of an oven with dimensions
F × F and a length of 600 mm and four free rails, which are mounted
according to the roof pitch on the pipe. Everything is made of galva-
nized sheet metal.
Pic 24:
Roof section
MONZUN [kW]
Dimensions [mm]
Weight [kg]
F
–
15, 20
560
16
30, 40, 50, 60
710
21
Tab 14:
Dimensions of roof section
