NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
13
SPECIALIZED COMPONENTS
ANCHOR PLATE (DTC-AP)
INSULATED WALL RADIATION SHIELDS
This support is used on a masonry fireplace
or on top of a furnace to provide a positive
connection to the chimney. It is not to be
used in contact with any combustible mate-
rial, such as on a wood floor.
INSTALLATION INSTRUCTIONS
Once the appliance is installed, bolt the anchor plate to it. Install the
chimney according to the installation instructions for the finish support
(DTC-FSC).
FACTORY-BUILT FIREPLACES
For chimneys installed on factory-built fireplaces, follow the installation
instructions accompanying the fireplace.
INSULATED RADIATION SHIELD (DTC-FSI)
It must be used in combination with an attic radiation shield (DTC-ISI)
when passing through an attic. This component provides a 2"-safety
clearance to combustible materials surrounding the chimney.
ANGLED INSULATED RADIATION SHIELD
(DTC-WRSI30/DTC-WRSI45)
It has been designed for use when a chimney passes through a wall at
an angle. (See figure 27 for application).
Ø
INT.
FRAMING SIZE
DTC-FSI
DTC-WRSI30
DTC-WRSI45
7’’
8’’
10’’
7’’
8’’
10’’
7’’
8’’
10’’
A
16
16
18
37-3/4 39-3/4 45-5/16 26-5/8
28
30-1/2
B
3
3
3
16-5/8 17-5/8
19-3/8
16-5/8 17-5/8 19-3/8
C
13
13
5
12-5/8 13-5/8
15-3/8
12-1/8 13-1/2 14-7/8
D
--
--
--
33-3/4 35-3/4
39-1/4
22-1/8 23-1/2
26
E
--
--
--
3
3
3
3
3
3
Table 11
DTC-AP
Figure 25
Figure 26
A
B
C
DTC-FSI
DTC-WRSI30
DTC-WRSI45
A
D
B
C
E
