M&C EC Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 41

M&C EC Series Скачать руководство пользователя страница 9

www.mc-techgroup.com

ECM-ExII | 1.02.00

9

7

Information and safety instructions for using the cooler

Warning

Inhalation hazard possible, if using toxic or asphyxiant gases!
Purge cooler with inert gas or air before opening! If the cooler is used for

toxic gas or asphyxiant (oxygen-displacing) gas, it needs to be purged with

inert gas or air before opening. Follow closely all relevant occupational

safety regulations during operation..

Warning

Disconnect power supply before opening the device for access.

Make sure that all external power supplies are disconnected.

Do not carry out any work at the sensor while potentially explosive

atmosphere is present.

The process and the environment of the device needs to be explosion-free

(explosion-free zone) during any maintenance or repair work. A zone is

declared as explosion-free zone, if it is free of explosive atmosphere.

Aggressive condensate is possible.

Wear protective gloves and protective glasses!

Wear proper protective clothing!

«
...
7
8
9
10
11
...
»

Содержание EC Series










































Отзывы:

Нет отзывов