If you can see a white tab, the holder is ·properly loaded. Don't pull the white
tab at this time. Now you're ready to attach the holder to the camera. If no
white tab appears, do the following in dim light: Unlock the back of the holder
and open it part way without disturbing or moving the film pack.
Push the white tab out and into the open, and then close and lock the back of
the holder making sure that the white tab is outside and in front of the latch.
The holder is now ready for the first exposure.
Mount the holder on the camera body, set the film speed dial to the correct
ISO value, and then remove the dark slide.
Attaching the Polaroid Pack Film Holder to the Camera
1.
Position the Attaching Clip (A) of the holder to the Mounting Bracket (B) of the camera body.
2.
Press the upper part of the holder against the camera body until the holder clicks and locks into
place.
3.
Before making exposures, remove the Dark Slide and store it in the Dark Slide Holder.
Removing the Polaroid Pack Film Holder from the Camera
1.
Insert the Dark Slide into the holder between the two white lines.
2.
Push the Lock Release Lever in the direction of the arrow, and remove the holder from the
camera body.
