2
2
1
1
4
4
1
1
2
5
LE
N
S
M
A
D
E
IN
JA
PA
N
Mam
iya
645
∞
ft
m
29
30
Setting the Film Speed
The film speed (ISO sensitivity value) is the reference for all exposure and must be set
correctly. If the set value differs from the actual value of the film in use, under- or over-
exposure may occur.
1. Press the (up) button.
When the LCD panel displays information,
press and hold the
(up) button on the bottom
part of the LCD for more than 1 second. The
ISO indicator will blink.
The setting is not complete while the ISO indicator is blinking.
For a power-saving purpose, display on the LCD panel disappears in 5 seconds,
when the roll film holder is detached from the camera body. The display resumes by
pressing the
button.
When the battery of the roll film holder is exhausted and it is not attached to the
camera body, no information will be displayed on the LCD panel. As it may cause
malfunction, replace the battery with a new one.
2. Set the film speed.
Set the film speed of the film by pressing the
(up) or
(down) button. To lock the speed
setting, press and hold the two buttons
simultaneously for more than one second; the
film speed will be written in memory in 5
seconds.
Attaching the Lens and Magazine
Attaching the lens
1. Attach the lens.
Align the white alignment dot
of the lens
(on the shiny flange) with the camera's white
dot
, fit the lens into the camera and rotate
it clockwise until it clicks into place.
1.
Match the groove on the magazine body
coupler with the holder bracket (lower) of the
camera body and snap the magazine into the
body.
Attaching the magazine
2.
Then you move them together like you
close a book until they lock and you hear the
focal plane shutter open.
