AUTO
A
A-S
S
MADE IN JAPAN
AUTO
A
A-S
S
MADE IN JAPAN
21
22
Diopter Adjustment
Look through the viewfinder and make sure that the focus frame (Rectangle with
Circle) is in sharp focus. If it is not, turn the diopter adjustment dial in the “–” direction
if you are nearsighted, in the “+” direction if you are farsighted. If this is not sufficient
you may require an optional diopter correction lens. See below.
Point the camera at a bright, plain object such as a white wall when making this
adjustment.
Replacing the Diopter Correction Lens
If there is dirt or dust on the lens surface, remove it with a blower or sweep it off
gently with a lens brush.
If there are fingerprints or dirt on the lens surface, wipe it off with a piece of clean,
soft gauze.
Using solvents could discolor the diopter correction lens frame.
1.
Remove the lens supplied with the finder by
pulling it downward.
2.
Push the replacement diopter correction lens
upward into the viewfinder’s eyepiece frame
until it clicks into place.
Diopter matches.
Diopter does not match.
Range of adjustment of diopter correc-
tion lenses (Optional accessory)
Diopter correction lens
Range of adjustment
DE401 (standard)
-2.5 to +0.5
DE402 (for nearsighted users)
-5.0 to -2.0
DE403 (for farsighted users)
0 to +3.0
Diopter
adjustment dial
