Malvern Zetasizer Nano Series, Руководство по самостоятельной установке и быстрому запуску

Страница: 11 / 16

7
5. Load the cell
Depending on the test being run, one of these prompts appears:
Load the appropriate cell in the instrument, following the procedure below, then click OK .
Size test
Zeta potential test
For a Size test :
For a Zeta potential test :
a.
Press the button to open
the measurement
chamber lid:
ill 7942
b.
Most cuvettes have a triangle
or spot mark. This must face
towards the front of the Nano:
ill 7943
c.
Push the cuvette down so
it’s firmly located then push
down the chamber lid:
ill 7944
a.
Press the button to
open the measure-
ment chamber:
ill 7942
b.
The cell has a weld line just behind
the front surface, as shown here:
ill 7945
c.
Holding the cell near its top, turn
the weld towards the front of the
instrument. It
must face the front
of the Nano when inserted.
d.
Push the cell into the cell
holder until it stops.
ill 7946
e.
Close the measurement
chamber lid to cover the
cell.