Malvern Visco 88, Руководство пользователя

Страница: 37 / 74

Other tasks Chapter 4
Visco 88 Page 4-3
Reporting the residual torque
Only do this if you think there is something wrong with the motor. For example, if
there is any defect in the motor bearings this procedure can control the residual
torque of the motor.
Perform the following procedure with no measuring system attached.
To report the residual torque:
1.
Turn off the power using the ON/OFF button.
2.
Set the SYSTEM switch to position 8. (The SPEED switch can be in any
position.)
3.
Simultaneously hold down the START button and press the ON/OFF button
to switch the power on.
4.
Release the START button when tESt appears on the display. The text init
then appears on the display.
5.
When the text
init
disappears and
OFF
appears on the display, turn the power
off using the
ON/OFF
button.
6.
Press the
FUNCTION
button until the residual torque,
M
, is shown.
7.
If the residual torque is high (greater than l mNm) this indicates a defect; con-
tact Malvern Instruments.