Malvern Instruments Mastersizer X, Руководство пользователя

Страница: 29 / 102

.
Similarly, make a connection between the outlet (top connection) of the
flow cell
Ã
to the top connection of the Dispersion Unit
Ä
with sample
tubing. Pass the tube through the cover by squeezing the tube and fitting it
into the “keyhole” recess
Å
. Make sure the tube is not constricted.
.
Ensure that all sample tubing is arranged such that there are no twists or
loops. This is because the flow cell and tubing drain under gravity.
.
If your sample and dispersant are safe to be disposed of into the water sys-
tem, connect a length of drain tubing between the drain of the Dispersion
Unit and a sink, otherwise place a suitable sized beaker or conical flask (at
least 150 ml capacity) below the drain outlet. Again, ensure the tubing is ar-
ranged such that the Dispersion Unit can drain under gravity.
.
Attach the 37 way D type connector (digital I/O) from the Controller Unit
to the digital I/O socket on the Mastersizer.
.
Attach the Dispersion Unit cable on the Dispersion Unit to the 15 way D
type connector on the Controller Unit.
.
Connect the mains power cable into the power socket at the rear of the
Controller Unit.
Small
Volume
Sample
Dispersio
n Unit
I
N
S
T
R
U M
E N
T
S
Small
Volume
Sample
Dispersio
n Unit
I
N
S T
R
U
M
E
N
T
S
Disper
sion U
nit Con
troller Stirrer Speed
RPM
I N S
T R U M
E N T S
Disper
sion U
nit Con
troller Stirrer Speed
RPM
I N S
T R U M
E N T S
4 5 6
2 3
1
ILL
3039
C H A P T E R 3
Q S S M A L L V O L U M E S A M P L E D I S P E R S I O N U N I T
P a g e 3 . 5