SED GPH-650R
User Guide
- 17 -
Originating a group call
In the standby status, open the
Dial
application to enter the
Dial pad
. Input the group call number and select the V
GCS
button to originate the group call; You can also view the
Dial List
, directly click the
Dial
button right to a group call
record, or enter
Call details
of this record to select the
SIM 1
button to originate the group call.
Originating a broadcast
In the standby status, open the
Dial
application to enter the
Dial pad
. Input the broadcast number and select the
VBS
button to originate the broadcast. You can also view the
Dial List
, directly click the
Dial
button right to a broadcast
record, or enter
Call details
of this record to select the
SIM 1
button to originate the broadcast.
Note:
If you input an incorrect or an inactivated group call/broadcast number, a prompt indicating the group call or
broadcast failure is displayed on lower part of the screen and you cannot originate this group call or broadcast.
Ending a group call
The group call originator can end the group call as follows:
You can click the
Close
button at bottom of the screen, or press the
End Key
to select to close the group call according
to the prompt.
Note
: The dispatcher can also end the group call; other users not originating the group call cannot end the group call but
can only exit the group call.
Ending a broadcast
The broadcast originator can click the
Close
button on the talking screen to end the broadcast, or directly press the
End
Key
to end the broadcast.
Exiting a group call
The group call originator can exit the group call as follow:
Exit a group call
