16
5
Full Body Harness Instruction Manual
hooks should not be connected to standard size D-rings or similar objects
, as such use
will result
in a load on the gate if the hook or D-ring twists or rotates. Large throat snap hooks are designed
for use on structural elements such as rebar or cross members that are not shaped in such a
way that
they may
capture the gate of the hook.
•
False engagement connections, where protruding features of the snap hook or carabiner may
catch on the anchor and seem to be fully engaged to the anchor point. Always confirm
engagement.
•
Connection to snap hooks or carabiners.
•
Direct connection to webbing lanyard, webbing loop, rope lanyard or tie-back (unless the
manufacturer’s instructions for both the lanyard and connector specifically allow such a
connection).
•
Connection of a snap hook to a D-ring, rebar, or other connection point of improper dimensions in
relation to the snap hook dimensions or configurations that could cause the snap hook keeper to
be depressed by a turning motion of the snap hook, or such that
snap hook or carabiner will not
fully close and lock, or that roll-out could occur.
•
Illustration 4 depicts examples of inappropriate connections:
Illustration 4: Inappropriate Connections
Connector Compatibility Limitations
•
A Competent Person must ensure the compatibility of all connections and that of the system.
•
Do not use the system if any connector does not lock or if any other component in the system
does not operate properly.
•
Allow sufficient safe clearance in the event of a Free Fall.
•
System must be rigged to limit the total Free Fall Distance according to the type of system, and in
compliance with ANSI and OSHA directives.
•
Do not use if any part of the system appears to be damaged.
•
Do not use a body belt for fall arrest applications.
5
14
Full Body Harness Instruction Manual
Warranty
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Equipment offered by Malta Dynamics is warranted against factory defects
in workmanship and materials for a period of one year from date of installation or first use by the
original owner. LIMITED REMEDY: Upon notice in writing, Malta Dynamics will repair or replace all
defective items at Malta Dynamics’s sole discretion. Malta Dynamics reserves the right to require
that the defective item be returned to its plant for inspection before determining the appropriate
course of action. Warranty does not cover equipment damage resulting from wear, abuse, damage
in transit, failure to maintain the product or other damage beyond the control of Malta Dynamics.
Malta Dynamics shall be the sole judge of product condition and warranty options. This warranty
applies only to original purchaser and is the only warranty applicable to this product. Please contact
Malta Dynamics customer service department at 800-494-1840 for assistance. LIMITATION OF
LIABILITY: IN NO EVENT WILL MALTA DYNAMICS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO LOSS OF PROFITS, IN
ANY WAY RELATED TO THE PRODUCTS REGARDLESS OF THE LEGAL THEORY ASSERTED.