background image

1

5

Easy Slider I-Beam Anchor

 Instruction Manual

 

MaltaDynamics.com | 800-494-1840

Visit www.MaltaDynamics.com for the latest user 

instruction manual based upon date of manufacture.

MAINTENANCE & CLEANING

Wipe  off  all  surface  dirt. 

Clean with compressed air and/or a stiff brush using 

plain water or a mild soap and water solution to 

clean  away  contaminants;  wipe 

hardware  dry  with  a  clean  cloth.  Hang  away  from  heat  and  allow  to  dry 
completely.  Store  in  dry,  clean environment  away  from  direct  sunlight  and 
excessive  heat.  Avoid  storage  in areas  where  chemical  vapors  may  exist. 
Thoroughly  inspect  lanyard  after extended storage. 

Frequency:

• All equipment must be visually inspected prior to each use according to the

manufacturer’s instructions included at time of shipment. Inspections must be

performed by a Competent Person other than the user (as defined by OSHA) a

minimum of

 

once

 per year.

• Record the results of each formal inspection in your Hog Tracker account or

inspection log.

NOTE: Per Cal/OSHA PFAS must be inspected by a competent person at least

once

 a year, in accordance with the manufacturer’s recommendations, with

inspection dates documented.

Repairs to the Easy Slider I-Beam anchor can only be made by a Malta

Dynamics Fall Protection representative or an entity authorized by Malta

Dynamics. Contact us for all maintenance and repair needs or to inquire about
a return at: 1-800-494-1840.

Harsh weather and harsh environments, prolonged use, and 
other extreme working conditions may require you to have this 
inspected by a competent or qualified person than yourself at 
least 

once 

a year.

Содержание A6101


















Отзывы:

Похожие инструкции для A6101