Malsch AYLEEN CARE BED, Инструкция по эксплуатации

Страница: 17 / 44

| 17
The rating plate is located on the underside of the sleeping sur-
face, at the head of the bed on the right. To inspect the rating
plate, raise the back rest to the highest position.
Notes:
1.
Manufacturer’s address
2. Model ID
3. Serial number
4. Electrical voltage; Frequency; Power consumption
5. Operating time of motorised adjustment: Please observe
this information to protect against overheating! In the ex-
ample, the drives of the bed are limited to a maximum of
2 minutes of continuous operation. If this limit is reached,
a regeneration period of 18 minutes must be observed
before the drives can be operated again.
6. Protection of electrical equipment from water spray “only
use in dry areas”
7. Indicates the next technical check after delivery in line with
VDE0751-1
8. Explanation of the safety symbols used on the rating plate:
Labelling as a medical device
Application part type B
Directive 2012 / 19 / EU relating to old electrical and
electronic equipment
Conformity marking in line with the Medical Device
Directive (EU) 2017 / 745
Protection class II
“Only use in dry areas”
“Observe the instruction manual”
9. Explanation of the weight icons used on the rating plate:
Safe working load
Maximum permissible weight of residents
Maximum total weight of the medical device incl resi-
dent (bed weight plus maximum safe work load)
10. 2D barcode (GS1 data matrix) DI + PI = UDI
11. (DI) Device Identifier
(01) UDI-DI / GTIN
(PI) Production Identifier
(21) Serial number
(240) Additional product information