20
IT
ALIANO
ENGLISH
20
IT
ALIANO
ENGLISH
Injector
• Follow the wire coming out of the
injector and cut it at about 3 cm
from the connector, as shown in
Fig. 2
.
• Connect the female faston
1
supplied into the kit to the original
connector
2
by using the joint
3
,
and carefully respecting the colours
of the wires
(Fig. 3)
.
NB
: pay attention to use the
FEMALE faston!!!
• Close the joint using a pliers, such
as shown in
Fig. 4
.
• At this point connect the male
faston to the wiring of the vehicle,
using the joint.
• Follow the wire that exits the
injector and determine its
connector, disconnect this original
connector and reconnect with
the two connectors from the
Malossi ECU.
Ground
• Connect the black cable (negative
pole) coming out of the Malossi
control unit to the screw of the
variator cover
(Fig. 5)
.
Содержание FORCE MASTER 2.1
