Fluid Warming Cabinet
Operation, Maintenance and Installation Manual
Issue 18
Page 3
Jun-23
Safety Instructions - Warnings
Please read and understand this manual before using this device, if this device is used in a manner not specified
by the manufacturer protection by the device may be impaired.
Please refer to this manual for information wherever this warning symbol is displayed
-
Be aware of 240 Voltage.
Disconnect power when servicing.
Mains power GPO must be in an accessible position so device can be
isolated from mains power during service.
If the supply cord is damaged it must be replaced by a special cord or
assembly from the manufacturer or its service agent.
Do not overload shelves.
Do not obstruct hot air outlet above top shelf.
Castors where fitted are for convenience but not as a means to be
wheeled across thresholds or similar obstacles. Castors enable the device
to be moved easily aside for cleaning the floor or making space.
Wall mounted units must be mounted to load bearing walls.
All cabinets should be located on a level floor surface and should never be
operated on a sloping surface.
Install temperature probes and element over temperature protection
thermal cut-outs correctly.
This Warming Cabinet is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge.
