Malmbergs JFC180A Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 84

background image

57

Concrete mixer safety warnings

1.

The product shall not be operating when it is being moved.

2.

Always place the product on a solid and level surface that is capable of supporting
the weight of the product and its load.

A fully loaded cement mixer is very heavy.

3.

Never stick your hands and/or tools into the product while the product is in opera-
tion.

4.

This product does not contain any parts that can be repaired by the consumer.

Con-

tact an authorised service centre or a similarly qualified person to have it checked
and repaired.

5.

Disconnect the product from the power supply before opening the enclosure.

Do

not operate the product unless the enclosure is fully closed.

6.

Do not inhale fumes.

Inhaling fumes is harmful and can damage your health.

7.

Avoid contact and inhalation of the used materials.

8.

Always use personal protective equipment.

9.

Maintain a safe working environment.

Keep the work area well it. Make sure there

is adequate surrounding work space. Always keep the work area free of obstruc-
tions, grease, oil, trash, and other debris. Do not use the product in areas near flam-
mable chemicals, dusts, and vapours.

Vibration and noise reduction

To reduce the impact of noise and vibration emission, limit the time of operation, use low-
vibration and low-noise operating modes as well as wear personal protective equipment.

Residual risks

Even if you are operating this product in accordance with all the safety requirements, po-
tential risks of injury and damage remain. The following dangers can arise in connection
with the structure and design of this product:

1. Danger of injury and property damage caused by tipping over product.

2. Contact with the moving mixing blades.

3. Contact and inhalation of materials used.

WARNING! This product produces an electromagnetic field during opera-
tion. This field may under some circumstances interfere with active or
passive medical implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their doctor and the
medical implant manufacturer before operating this product.

«
...
55
56
57
58
59
...
»

Содержание JFC180A





















































































Отзывы:

Нет отзывов

Похожие инструкции для JFC180A

Бренд: Tapco Страницы: 25

Бренд: Oster Страницы: 20

Бренд: MBW Страницы: 33

COMFORT MIX PLUS HM 3834

Бренд: SEVERIN Страницы: 1

MixWizard WZ4 14:4:2

Бренд: ALLEN & HEATH Страницы: 28

Betonmischer 120 Liter Pattfield

Бренд: Pattfield Ergo Tools Страницы: 52

Бренд: QSC Страницы: 26

Бренд: HAGER WERKEN Страницы: 6

Бренд: Felisatti Страницы: 36

Бренд: Rachel Allen Страницы: 16

SUPER PHASE SHIFTER SP400

Бренд: Behringer Страницы: 2

Бренд: F.F. Group Страницы: 40

Бренд: Electrolux Страницы: 4

Бренд: Electrolux Страницы: 4

Бренд: Electrolux Страницы: 4

Бренд: Electrolux Страницы: 4

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды