25
1
2
OPERATION
1. Stand the machine up, placed on a flat ground.
2. Check the water inlet filter to make sure it is free of blockage.
3. Use detergent to make better wash.
4. Connect the nozzle onto the spray lance and the lance onto the gun handle.
5. Connect the gun with the high pressure hose which is on the winding roll.
6. Push the high pressure hose out of the winding roll.
7. Connect the hose onto the water output exit.
8. Connect the water supply hose to the water entry of the machine.
9. Connect the other end of the supply hose to water source.
10. Press the gun trigger and turn on the water tap to expel the air inside the machine.
11. Plug in and turn on the machine.
12. Turn the nozzle until the water stream is in a shape you want. See pic 1 and pic 2.
13. After use, turn off the water tap, and then switch, finally plug out.
Recommended process
Hose to gun
hose to water outlet tube
water inlet hose to quick connector
attaching to unit
water inlet hose to tap
lance to gun pull the lance head to
set low water pressure, open the tap and trigger the gun to remove the air in the unit
connecting to power turn on the appliance, change to high pressure setting start to
work
Note:
water inlet hose connect to tap through quick connector.
1
5
4
2
3
Connector to tap
Water inlet
Water inlet connector
Water outlet
Switch
ASSEMBLY
