18
Problem
Possible reason
Solution
The iron is plugged in,
but the soleplate stays
cold.
There is a connection prob-
lem.
Check the mains cord, the plug and
the socket.
The temperature control
dial is set to MIN.
Set the temperature control dial to
the required position.
The iron does not
produce any steam.
There is not enough water
in the water tank.
Fill the water tank.
The variable steam control
is set to “OFF” position.
Set the variable steam control to
“
” or “
”.
The iron is not hot enough
and/or the anti-drip func-
tion has been activated.
Set an ironing temperature that is
suitable for steam ironing (•• to
MAX). Put the iron on its heel and
wait until the temperature light goes
out before you start ironing.
The burst of steam
function does not work
properly.
You used the burst of steam
function too often within a
short period.
Continue ironing in horizontal posi-
tion and wait a while before you use
the burst of steam function again.
The iron is not hot enough. Set an ironing temperature at which
the burst of steam function can be
used (••• to MAX). Put the iron on
its heel and wait until the tempera-
ture light goes out before you use
the burst of steam function.
Water droplets drip onto
the fabric during ironing.
You have not closed the
water filling cover properly.
Press the cover until you hear a click.
You have put an additive in
the water tank.
Rinse the water tank and do not put
any additive in the water tank.
You have used the burst of
steam function at a temper-
ature setting below •••.
Set the temperature control dial to a
setting between ••• and MAX.
You have set a too low tem-
perature for steam ironing.
Set an ironing temperature that is
suitable for steam ironing (•• to
MAX). Put the iron on its heel and
wait until the temperature light goes
out before you start ironing.
Water drips from the
soleplate after the iron
has cooled down or has
been stored.
You have put the iron in
horizontal position with
water still left in the water
tank.
Empty the water tank before you
store the iron. Store the iron on its
heel.
Impurities or flakes come
out of the soleplate.
Hard water forms flakes
inside the soleplate.
Use the self-cleaning function one or
more times.
TROUBLESHOOTING
If you have a problem, you may find the solution in the table below. In case these solutions can
not solve your problem yet, please contact with the nearest authorized service agent for exami-
nation, repair or adjustment.
