Starter Section Fits
Into Hood
Hood
Slip Connector. Sheet
Metal Screw to Chim-
ney Connector.
Single Wall Chimney
Adapter
Insulated Class "A"
Chimney System
Slip Connector
Sheet Metal
Screw
Support Box
Imperial Carousel - Page 5
The above illustration represents the installation procedure for dripless pipe installation. This installa-
tion method of installing the connector pipe with the male end down allows for any moisture to remain
on the inside of the connector pipe.
IMPORTANT: THE SINGLE WALL CONNECTOR PIPE MUST NEVER PASS
THROUGH A COMBUSTIBLE CEILING OR WALL.
At fi rst glance you may become concerned that smoke will escape the pipe and enter the room. This
is not how the system will work. The vacum in the chimney system will always pull air into the chim-
ney. If you experience a downdraft with your installation it indicates that additional chimney height or
a specialty draft cap be added to your chimney system. Contact your dealer for further information
regarding downdrafts.
Do not use a damper with your Carousel. The use of damper will most likely do damage to your unit. It
may cause the ceramic glass to soot up and void any warranty.
Ceiling
Insulated Pipe
DuraVent 8DVL-ADC or 8878 Adapter
ICC Excel Flue Extension (8EX)
Selkirk Stovepipe Adaptor
Or Single Wall Chimney Adapter
ADAPTER NOT INCLUDED
ICC Excel
8EX
DuraVent
8878
Malm connector pipe is designed to
fi t together without requireing fastners
between the connector sections.
