4
interruption, all previous temperature settings are automatically erased. When power
again ,the compartment will automatically resetting the temperature of : 12
℃
.
-Set the desired cooling temperature by pressing the corresponding buttons
for
“set
lower” program. Each time of press the buttons, temperature will reduce 1 degree. The
temperature selected will flash in the LED display for approximately 5 seconds, then
revert back to display the temperature of the internal cooler, pressing the
corresponding buttons for
“set rise” program.
The temperature setting can be adjusted from 5
℃
to 20
℃
.
-To view the “set” temperature (anytime),you need press the “set” button one time,
temperature will temporarily “flash” in the LED display for 5 seconds.
RUN
Indicator light illuminates to show the cooling function is currently in operation.
Light
You can turn the interior light ON or OFF by pushing the button marked with the “bulb”
symbol. The light will be turned off automatically after it press ON for 10 minutes. You
have to push the button marked with the “bulb” symbol again and the light will turn
on
again.
For best storage of wine, keep the light
turn off except when viewing.
LOCK
Press "LOCK" button for 3 seconds,the control panel will lock and can not operate anymo
re program until press "LOCK" button again, it will rework.
Also press rise"
" and lower "
" buttons for 3 seconds, you can achieve " Celsius
" and " Fahrenheit " temperature transforming.
NOTE:
-If the unit is unplugged, turned off or if there is a power failure, you must wait 3 to 5
minutes before restarting the unit.
-When you use the Wine Cooler for the first time, or restart the Wine Cooler after having
been shut off for a long time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED readout. This is normal and is
due to the length of the inactivation time. Once the wine Cooler running for a few hours
everything will be back to normal.
Содержание MWC-89S
Страница 7: ...7 ...
