Malloca MTD-010SIL, Инструкция по эксплуатации

Страница: 6 / 25

9 10
OPERATIONS
After Drying
Drying
Buzzer beep or
" :
00
"
on display
.
0
1 2 3 4 5
open the door and
take out laundry pull out the
container
pour out
condensate water
clean the filter power off
Quick Start
Before using
,
please make sure it
'
s installed properly
.
Note!
1
plug in
2
load
3
close door
start
on
select program select function
or default
• If the socket with a switch is used, please press the switch to turn off the power
directly.
Note!
OPERATIONS
Never overload
.
• Not for textile with dropping water. The dryer could be damaged, even fire.
•
1.Before drying, thoroughly spin the laundry in washing machine. High spin speed can
the drying time and save energy consumption.
2.For uniform drying result, sort the laundry according to fabric type and drying programme.
3.Before drying, please close zips, hooks and eyelets, button up, tie fabric belts, etc.
4.Do not over dry the clothes, because over dried clothes can easily get creases.
5.Do not dry the articles containing rubber or similar elastic materials.
6.The door can be opened only after the programme of the drying machine finishes to
from being scalded by hot steam or over heated drying machine.
7.Clean the lint filter and empty container after each use to avoid extension of drying time
and energy consumption.
8.Do not dry these clothes after dry-clean process.
9.
reduce
prevent human skin
Please choose the related programme when dealing with wool material clothes, to make
the cloth more fresh and fluffy.
The reference weight of dry clothes (each)
Mixed-fabric clothes
(about 800g) Jacket
(about 800g cotton) Jeans
(about 800g) Towel quilt
(about 900g cotton)
Single bedsheet
(about 600g cotton)
Short sleeve shirt
(about 180g cotton)
Work clothes
(about 1120g)
Short pants
(about 70g cotton)
Sleepwear
(about 200g)
Socks
(about 50g
mixed-weave)
Long sleeve shirt
(about 300g cotton)
Note!
Before Each Drying
•
Put some clean rags into the drum.
Plug the power, press
【
On/Off
】
Select the
【
Refresh
】
Programme, press
【
Start/Pause
】
button
After finishing this programme, please follow the “cleaning and care ”
(refer to page 19) to clean the filter door.
• During drying, the compressor and the water will generate some noise
which is entirely normal
.
Leave it to stand for 2 hours after transporting. Before first use, please use
the soft fabric to clean the inside drum. .
1.
2.
.
3. .
4.
Note!