Malloca MR 593, Инструкция по эксплуатации

Страница: 6 / 16

6
described above and the accident prevention norms not being respected and followed.
To avoid all risk, if the power cable becomes damaged, it must only be replaced by the
manufacturer, by an authorized service center, or by a qualified electrician.
User’s Instructions
Installation
All operations relative to installation (electric connection) should be carried out by skilled
personnel in conformity with the rules in force.
As for the specific instructions see part pertaining to ins- taller.
Use Touch control (Fig.1)
1. ON/OFF
2. Minus –
3. Plus +
4. Double / Triple circuit
5. Cooking zone
6. Setting level display
7. Illuminated Segment Multiple Circuits
Switching the Touch Control ON/OFF
After mains voltage is applied the control initializes for approx. 1 second before it is ready for
operation.
After a reset all displays and LEDs glow for approx. 1 second. When this time is over all displays
and LEDs extinguish and the control is in the stand-by mode. Safety lock is activated and the safety
lock indicator LED is illuminated (11).
Press the ON/OFF (1) button to switch the touch control on. The cooking zone displays show a
static “0”.
If a cooking zone is in the “hot” status, the display shows a static “H” instead of “0”.
After switching ON the electronic control remains activated for 20 seconds. If no cooking zone or
timer selection follows within this period of time, the electronic control automatically switches back
into the stand-by-mode. The control can only be switched ON if it identifies the ON/OFF (1) key
alone being operated. Should it recognize ON/OFF (1) key activation other than that, the control
remains in the standby- mode.
Automatic Switch Off
When the control is ON it automatically switches-OFF after 20 seconds. After selecting a cooking
zone, the automatic off time is divided into 10 seconds, after wwhich the zone iss deselected and,
after another 10 seconds, the touch control switches off.
Switching a cooking zone ON and OFF
1. If the touch control is switched on, the cooking zone can be selected by pressing the button (5) of
the corresponding zone.
2. The display (6) of the zone selected lights up, while the re- maining displays are dimmed. if the
cooking zone is “hot”, “H” and “0” are alternately displayed.
3. Press the PLUS (3) or MINUS (2) button to select a setting and the zone will begin to heat up.
4. Once the cooking zone has been selected, the setting can be selected by keeping the PLUS (3)
button pressed down. The setting begins at level 1 and increases by 1 level every 0.4 seconds.
When setting “9” is reached, the setting will not be changed further. If the setting level has been
selected using the MINUS (2) button, the start level is “9” (maximum level). Keep the button
pressed down to lower the active level by 1 every 0.4 seconds. When setting “0” is reached, there
will be no further setting changed. The setting can only be changed by pressing the MINUS (2)
or PLUS (3) button again.
Switching a cooking zone off